*****Last Ten Active Topic***


Project Report
EXAM FOR SECTION A
project work 2018
AD302 material science summer 2018
Free download question paper of material science winter 2016
Notes for Pulse & Digital circuit
Free Download AMIE Section A study notes on AD 302
Result of lab and project
AMIE WINTER 2017 RESULT HAS BEEN DECLARED
Query related to re registration of section b

 

 

 

 

 

Registration Running on Online Classes for AMIE Summer 2018 Click Here to Register

Best Way way for study of AMIE

Discuss your AMIE related anything quaries.....

Best Way way for study of AMIE

Postby rashmi45 » Sun Sep 22, 2013 6:53 pm

Best Way way for study of AMIE

1. First thing to be stored in your mind that there is no any shortcut for success same way for AMIE.

2. Make a delicate balance between AMIE study and your job. try to study daily minimum two hours.

3. For section A student they first take easy subject like Design and manufacturing and society and environment and score good grade to get exemption in material science, if you feel material science is tough .

4. If you are unable to prepare for 4 subject then prepare for minimum 2 subject such a way you must clear those subject in any condition.

5.For recommendation of books i want to say use those books for a subject which you can understand easily because clearance of concept is very important also take advice from your friend regarding this.

6.Study for AMIE with a consistency without this you can not complete your syllabus.

7.Before one week or 10 days back of AMIE examination do not start studying new thing it is better if you clear your concept what you have studied or revise it. quality is important not quantity.and clear this subject with good grade this will helpful to get exemption in other subject like material science.

Regards
Rashmi
Regards
Rashmi
rashmi45
 
Posts: 16
Joined: Fri May 17, 2013 11:53 am

Re: Best Way way for study of AMIE

Postby muk_patil2k1 » Fri Oct 18, 2013 10:10 am

The Associate Member of the Institution of Engineers (AMIE) is a professional certification given by Institution of Engineers (India). The qualification can be earned by passing Section A, Project Work, Laboratory experiments and Section B examination of the Institution.

If an applicant passes Section A, Project Work, Laboratory experiments and Section B examination, he or she becomes an Associate of the Institution of Engineers (AIE). The Indian Ministry of Human Resource Development considers this qualification is equivalent to a degree in engineering. AIE was earlier Grad IE (Bachelor's degree of Institution).

Government of India in continuation to its earlier recognition, has recognized passing of sections A and B examinations as revised, conducted by The Institution of Engineers (India), as equivalent to bachelor's Degree in the appropriate branch of Engineering of the recognized universities in India.[1]

AMIE is also recognized by UK-NARIC as British Bachelor's Honours degree.[2] AMIE is also recognized by the Foreign Credential Service of America as equivalent to Bachelor's degree in engineering.[3]

Minimum duration for passing both sections is 4 years, however professionals with 3 years polytechnic engineering can complete it in 3 years since they are exempted from certain examination papers of Section A. Project work, Laboratory experiments can be carried out only after clearing at least 5 subjects of Section B.

The Institution of Engineers (India) was established in 1920 in Kolkata, West Bengal and is acclaimed to have pioneered non-formal education in Engineering. IEI (I) conducts an examination for its Associate Membership. This examination is considered to be on par with B.E. / B.Tech.[4] when contemplated as an eligibility qualification to write competitive examinations like the Indian Civil Service, Indian Engineering Services, GATE, etc., and for employment in Government, public and private sectors in India. This qualification is recognised by Ministry of HRD, Government of India as equivalent to B.E./ B.Tech.

There are 2 sections, namely Section A and Section B, in this
How to join AMIE

Those who meet specified educational qualification can join AMIE any time. The completed application may be sent to head quarters of IEI, Kolkata.
Section-A examination

Tech Members who have been on the roll of the Institution of Engineers for a year are eligible to appear in the non-diploma stream examination based on their date of election to membership. Sr Tech Members can appear in the diploma stream. The exact dates and other details regarding the examinations like the last date of submission of examination forms, etc., are announced by the Institution of Engineers in the 'Technicians' Journal.'

The examinations are held twice every year, called Summer and Winter examinations, normally in May / June and November / December respectively (Generally from first Saturday.

Subjects in Section A examination are:

Diploma Stream (Scheme Code - 3)

AD 301 Fundamentals of Design and Manufacturing
AD 302 Material Science and Engineering
AD 303 Computing and Informatics
AD 304 Society and Environment

Non-Diploma Stream (Scheme Code - 2)

AN 201 Fundamentals of Design and Manufacturing
AN 202 Material Science and Engineering
AN 203 Computing and Informatics
AN 204 Society and Environment
AN 205 Mechanical Science
AN 206 Engineering Physics and Chemistry
AN 207 Engineering Drawing and Graphics
AN 208 Electronics & Instrumentation
AN 209 Engineering Mathematics
AN 210 Electrical Science

Section A examination is common for all. Basic Sciences, Engineering Sciences and Communication are covered to prepare the candidate, after passing section A examination, move on to Section B by choosing a particular discipline from among the streams offered and after passing min. 5 papers of section-B in respective branch, the student will be admitted to appear for Project Work/Laboratory experiments
Section B examination (Scheme Code - 4)

After Section A, the student will be admitted to appear for the Section B examination and after passing min. 5 papers of section-B in respective branch, the student will be admitted to appear for Project Work/Laboratory experiments.

Section B examination consists of 9 papers of which 6 are compulsory and 3 optional. Optional subjects available in three groups, each contains 5 subjects. Student has to select 3 subjects from any one group. Currently, only the following branches of engineering are covered:

Aerospace Engineering
Architecture Engineering
Chemical Engineering
Civil Engineering
Computer Science & Engineering
Electrical Engineering
Electronics and Communications Engineering
Mechanical Engineering
Metallurgical and Material Science Engineering
Mining Engineering
Production Engineering
Textile Engineering

Scheme of the examination

Each paper is 3 hours long and total marks are 100 (unless specifically mentioned otherwise in the list of subjects). Question paper consists three groups, Group A, Group B and Group C. In Group A & Group B, student has to answer two questions out of four, each question carries 20 marks. In Group C student has to answer 10 questions out of 10 for 20 marks. The maximum number of papers a candidate can appear at a time is:

Section A : 4 papers
Section B : 4 papers

Minimum possible time to complete Section A:

Non-Diploma stream: 3 and half years
Diploma stream: 6 months.

A candidate shall be required to pass the Institution Examinations, both in Existing Scheme and Revised Scheme, within a specific period as mentioned hereunder :

Section A : 6 Years Section B : 6 Years

Project work and/or laboratory work can be carried out only after clearing 5 subjects of Section B.

Additionally, person shall be employed and engaged in engineering activities during the period.
Academic eligibility for tech membership

Candidates who have passed in English and secured an aggregate of at least 45% in the qualifying examination as well as an aggregate of 45% in Physics, Chemistry and Mathematics are eligible to apply.

A list of qualifying examinations is given below:

Intermediate science examination with English, Mathematics, Physics and Chemistry.
B.Sc. examination with Mathematics, Physics and Chemistry.
First-year examination of a three-year Bachelor's degree course in any one of the subjects - Mathematics, Physics and Chemistry. The candidate should also have passed the Pre-University or Higher Secondary Examination with English, Mathematics, Physics and Chemistry.
The final examination of the two-year course (10+2+3 system) with English, Mathematics, Physics and Chemistry, conducted by any State Board of Higher Secondary Education or recognized Indian University after 10 years of formal school education.
Pre-professional examination in Engineering or the first-year examination of the five-year integrated course in Engineering. · Pre-engineering Examination.
The Board of Apprenticeship Training Admission examination, West Bengal.
The preliminary examination of B.Arch. held by Calcutta University.
The first-year examination of B.Tech. (Education) of Regional College of Education, Ajmer.
The two-year course carried out by the Indian Military Academy / National Defence Academy, Khadakvasla and Dehradun.
The Vocational Higher Secondary Course from the Directorate of Vocational Higher Secondary Education, Kerala.
The Senior Secondary School Certificate Examination of National Open School, New Delhi.
Diploma in: - Diesel Mechanics - Electrical Instrument Mechanics - Surface Coating Technology from the Board of Technical Examinations, Maharashtra - Vocational Training for Fitter conducted at Sumant Moolgaonkar Engineering Institute, Kymore, Madhya Pradesh.
B.Sc. degree in Electronics and Computer Science conducted at Narmada College of Science and Commerce, Bharuch.

Complete list of educational qualifications accepted for technician and senior technician membership.


Eligibility Conditions for various classes of student memberships

I Technician Members:

Candidates can directly become Technician Members if they have a minimum qualification of a pass in the Standard XII Examination (45% minimum aggregate).

II Senior Technician Members:

For selection as Senior Technician Member or for transfer from being a Tech Member to a Sr Tech Member, candidates must satisfy the following conditions:

A minimum age of 18 years on the date of application for selection or transfer.
He / she should be an engineer by profession working under a Corporate Member or a person qualified to be elected as a Corporate Member. The candidate should also be striving to acquire the qualifications for Corporate Membership (temporary unemployment is not an impediment to being elected).
The candidate should have passed a diploma examination in engineering or technology or its equivalent recognised by the Council, or an examination recognized by the Council as exempting from passing Section A of the Institution of Engineers examination in the non-diploma stream.

Examination centres

The examinations - Section A and B - are conducted in Abu Dhabi, Allahabad, Ahmedabad, Bhopal, Bangalore, Bhubaneswar, Chandigarh, Chennai, Coimbatore, Coimbatore - Peelamedu, Delhi, Durgapur, Gwalior, Guwahati, Hyderabad, Jabalpur, Jaipur, Jamshedpur, Kathmandu, Kochi, Kolkata, Lucknow, Nashik Nagpur, Patna, Pune, Roorkee, Rourkela, Behrain, Doha, Mumbai, Trichy, Thiruvananthapuram, Tirupathi, and Vishakapatnam, Salem City.

In addition, Section A (Both Diploma and Non-Diploma) examinations are held in Aligarh, Jammu, Jodhpur, Kanpur, Ludhiana, Vijayawada, Mysore, Ujjain, Ranchi, Shimla, and Vadodara.

Section B Diploma Stream examination also held in: Agartala, Cuddapah, Indore, Kharagpur, Srinagar, Karnal, Nasik, Neyveli, Madurai, and Portblair.

Hi friends you can download prospectus of AMIE 2012 AND Application form to apply and guidelines from this link:

AMIE STUDENT FORUM

AMIE UNSOLVED QUESTION PAPERS DOWNLOAD
AMIE SECTION A STUDY MATERIALS DOWNLOAD
AMIE QUESTIONS
AMIE QUESTION PAPER
AMIE EXAM TIPS
muk_patil2k1
 
Posts: 4
Joined: Tue Sep 24, 2013 11:35 am
Location: Surat, Gujarat


Return to GENERAL DISCUSSION

Who is online

Registered users: Bing [Bot]